Hi everyone. So winter is coming around again, and so starts all the issues with the heating !! :o(
Got an odd one here. I have a single zone that doesn't seem to be firing up the boiler. My set up is 8 zones in the house (1 for each rad). With all the other 7, if I request a higher room temperature than it currently is in that room, the valve opens, the boiler fires up and it all works.
However, with the Conservatory, the HR92 responds, opens the valve on the radiator but the boiler never fires up and so the rad never gets hot. It used to work, but I noticed it stopped at the end of last year but would hope it would go away before the winter this year. lol
I've deleted the Zone from the controller, reset the HR92, set the zone up again and rebound the HR92 but exactly the same thing ??!!!
Does anyone have any ideas. Am I correct that it's the controller that's bound to the BDR91 Relay as setting up the HR92 and binding it, it doesn't ask about the Relay. Just makes it more odd, that if the other zones are working, I know the controller is talking to BDR92 ok, so what is going on with this radiator ??
Any help would very much be appreciated, as I really do not want to have to reset the entire system and start from scratch. I had enough issues with it when I first set it up and don't want to go through that again !!
Got an odd one here. I have a single zone that doesn't seem to be firing up the boiler. My set up is 8 zones in the house (1 for each rad). With all the other 7, if I request a higher room temperature than it currently is in that room, the valve opens, the boiler fires up and it all works.
However, with the Conservatory, the HR92 responds, opens the valve on the radiator but the boiler never fires up and so the rad never gets hot. It used to work, but I noticed it stopped at the end of last year but would hope it would go away before the winter this year. lol
I've deleted the Zone from the controller, reset the HR92, set the zone up again and rebound the HR92 but exactly the same thing ??!!!
Does anyone have any ideas. Am I correct that it's the controller that's bound to the BDR91 Relay as setting up the HR92 and binding it, it doesn't ask about the Relay. Just makes it more odd, that if the other zones are working, I know the controller is talking to BDR92 ok, so what is going on with this radiator ??
Any help would very much be appreciated, as I really do not want to have to reset the entire system and start from scratch. I had enough issues with it when I first set it up and don't want to go through that again !!