I'm about to start a major upgrade to our home heating, including fitting a new unvented tank and Evohome for heating, and ideally water.
While I can see how to connect in the Evohome water kit via the relay, I'm struggling to find information on the suitability / ease of compatibility of different unvented cylinders with the Evohome cylinder temperature sensors.
From what I can see from diagrams / comments Megaflo has a spare temperature pocket in the immersion assembly; Gledhill has a spare temperature pocket at the same elevation as the overheat thermostat; but the OSO doesn't seem to have any specific provision?
Our preferred installer would like to fit OSO as that's what he is used to working with, so I wondered whether anyone had experience of integrating OSO and Evohome.
Thanks in advance for any help!
While I can see how to connect in the Evohome water kit via the relay, I'm struggling to find information on the suitability / ease of compatibility of different unvented cylinders with the Evohome cylinder temperature sensors.
From what I can see from diagrams / comments Megaflo has a spare temperature pocket in the immersion assembly; Gledhill has a spare temperature pocket at the same elevation as the overheat thermostat; but the OSO doesn't seem to have any specific provision?
Our preferred installer would like to fit OSO as that's what he is used to working with, so I wondered whether anyone had experience of integrating OSO and Evohome.
Thanks in advance for any help!