What is the latest build of Cortex?
Hi all, Seems to be quite quiet on here these days ... Any way, as per usual I managed to screw something up setting up my backups so had to go back to an older versio of the DB but it's not the end of...
View ArticleClik here to view.
BDR91 spacing
Hi Folks, My Evohome system was installed a couple of years ago and seems to work OK, apart from the hot water being a bit erratic. I'm wondering about the positioning of the BDR91s. They are quite...
View ArticleNetwork Watchdog without an MFP?
This may be a dumb question, but to date - I've not actually set up / relied upon Reflex at all, but I want to get something setup "In case". Skimming the Help pages ... It seems to state that you can...
View ArticleEvohome - phantom demand from Open Therm.
As per title, system has been installed and working fine for last couple of years. Ideal logic combi boiler, evohome and 2 HCE80. Middle of the night the boiler powers on as 15% heat demand from Open...
View ArticleLoxone releasing a new product 3rd Sept
So what will they be releasing?? Maybe a new audio server. Or a new miniserver with more integration built in. Or ???? Any other ideas?
View ArticleFlakey dt92's - is there a good fix?
Been a while since posting - of course because everything is working well! Or was... My install has 2 rooms running as multiple HR92s controlled by a dt92 temperature sensor - works great, no problems...
View ArticleAll rads working with HR 92 EVOHOME bar one1!
I've just fitted my system with the help of a good electrician. All the rads are working in harmony with the HR 92's but one rad is getting hot whenever the hot water is on! Its HR92 is set to off, but...
View ArticleFirmware 02.00.19.33 Released?
Yesterday I noticed a message I have never seen before had popped-up on the display of my Evohome. Something about hot/cold boost? Today, of course, I rushed to this forum to investigate this and found...
View ArticleNew Install Help
Hi Looking for a bit of help... I've just finished converting my S Plan+ system to EvoHome, but I'm having problems with the radiator values not switching the CH BDR91 value. The boiler fires...
View ArticleEvohome/HR92 battery notification
I am a satisfied Evohome user, i have 7x HR92 and a floor heating control unit in my setup. The only thing that keeps bothering me is the (lack of) low battery notifications via email/app and...
View ArticleSmart Fused Spurs
Greetings, I'm about to take on a property which has electric heating throughout, as well as electric hot water. All of this has been newly installed but the seller has gone the cheap route so it's all...
View ArticleEvohome Controller Lockup
My Evohome controller locked up yesterday at 17:08. The clock had stopped and there was zero heat demand on the radiators even though the rooms were below the set points. I had to disconnect the...
View ArticleEvohome Home Controller Beep
Hi Since yesterday my Evohome Controller, which I have had since 2015, has developed a long loud beep noise. At first, I did the usual checks, of making sure it is sitting on its stand and that the...
View ArticleEvohome : opentherm compatibility problem with Navien combi
Hi all, I've had an evohome setup, with a Honeywell Opentherm gateway, for just over a year now, working fine with my old Ferroli boiler. However, recently I had the boiler replaced with a shiny new...
View ArticleBlock on maximum temperature in one zone - limited to 22C
I have just tried to turn the heating up in a room as we have a friend coming and I know he feels the cold! The app would not let me increase the temperature in that room above 22C. It stopped with...
View ArticleClik here to view.
Radiators with Evohome HR92 and Valencia valves warming when they shouldn't
Hello I hope someone can help with stopping radiators warming unexpectedly. I've just had Honeywell Valencia V120-15 valves and Evohome HR92s put on all but one of my 9 radiators over 3 floors served...
View Articlefun with evohome and rfbee
To investigate my problems with Opentherm/Evohome and my new boiler (ref. in another thread) I decided to get an RFBee and UartSBee. To my pleasant surprise, this took about ten minutes to get working....
View ArticleEvohome with multiple BDR91's, HR92's and UFH and NO boiler ?
Hello, Firstly, welcome and thank you for many good tips already from other threads. Unfortunately I was not able to find answers to all my concerns and that's why I'm starting separate thread. I would...
View ArticleClik here to view.
New Install - Banging Head Against The Wall - Hot Water Sensor!
Hi I installed a few weeks ago our new Evohome installation. The CH is working as hoped but the hot water regularly (every few days) appears to overshoot the hot water temp by a considerable margin...
View ArticleAutomating electric water heater.
1stly I am just thinking about this, it will be a while before I can implement anything. I have a new thermal store heated by 2 immersion heaters. I got them to add a couple of sockets so I can add...
View Article