Clik here to view.
Sync & Comms ?
All of a sudden today I noticed a red notice on my controller that one zone had a low battery. On checking on the app this is what I saw:- Snap 2023-10-12 at 13.27.36.jpg 6 zones out of 12 failing. The...
View ArticleRadiators on with hot water?
A plumber came round today to reinstall a radiator that was removed 5 years ago. We have a Honeywell evohome system. The towel radiators comes on when the hot water is heated up. I have been told...
View ArticleClik here to view.
New HR92 setting on controller
Hello. A plumber installed a radiator today and added a new HR92. Its a newer model than my other ones. The list of devices on the controller shows the new one as radiator valve, evotouch sensor. I...
View ArticleWiring for automaed blinds
Hi All, I plan to install automated blinds in my renovation and I am jsut starting first fix. I am using Somfy RTS blinds but want to go 24v DC rather than battery. I would like to wire with a mains...
View ArticleClik here to view.
Why did they make these things conical?
If they were straight they would sit next to each other without issues, but now the whole thing looks like a fan and I fear that the sprockets on the outer units might get damaged. Attached Images...
View ArticleHR92s changing temperatures themselves
Last week the TRV in my hall decided to turn to 22.5c on its own even though the programme was set to 14c. Luckily hubby works from home and noticed the boiler had kicked in so managed to change the...
View ArticleClik here to view.
Boiler Cycling / HR92 hysteresis
Hi All, I've cross-posted this on another forum as I had forgotten about Automated Home (Sorry!) and was wondering if I could get anymore input/experience into this... My Setup - Open Vented System...
View ArticleHR92 - ideas for limiting open position?
Hi, I've recently moved to a new home, entering my first winter in it. Previous owner (actually probably the one before him) connected a much needed radiator on the top floor straight onto the main...
View ArticleMacro IF, which can test Light overide mode state?
Hi All, Aim: Porch light is automated with dark and PIR presence to turn on. Want to have a DFPH button 3 when pushed, overrides Porch light to ON and the button LED is set to flashing to remind. Push...
View ArticleClik here to view.
Hot Water Control Hysteresis?
Hiya, I'm playing with the hot water control and a thermostat and trying to get the boiler not to come on immediately the water temp drops below the threshold. As it tends to cycle on and off etc.......
View ArticleUFH "comfort heating" and radiators not playing nice, any ideas to try?
Apologies for the long post, but to explain it properly it takes a lot of words... Last year, I had all my radiators in our new house fitted with Herz TS98V radiator valves, as the old ones were simple...
View ArticleMulti Room Zones Actual Behaviour
Good morning I have set up a number of Multi Zone Rooms and have no issue with setting up nor with the high level statement by Residio Explanation of Multi zone rooms with evohome...
View ArticleIntergas with Evohome via opentherm
Hello, I know that boiler may be cycling when the set point is close to be reached however something strange has happend with my set up yesterday. Boiler was set to max 60C for CH I've noticed that it...
View ArticleHR92s missing zone names
My evohome controller told me bedroom 2 HR92 was low on battery. So I have just replaced them. I dont use that room very often but I have noticed the HR92 display doesnt have bedroom 2 on it. There...
View ArticleProblems with Lithium batteries in HR92s
I installed my Evohome kit in September 2015, a little over 8 years ago, and have been very happy with it. I am however beginning to think that HR92s deteriorate with age - dont we all ! In September...
View ArticleNew UFH Evohome HCC100 Issues
After quite a "mission" to get a Opentherm boiler fitted (frankly very few heating companies seem to understand what a OT boiler might be, let alone be competent enough to fit one and wire one up...
View ArticleEcohome hot water and rads
Beginners question: If I want to leave the radiator in one room on all night, will I have to have the hot water on all night as well?
View ArticleOpertherm and TPI at low flow temperatures
I have an Intergas boiler connected to EvoHome with OpenTherm via an OpenTherm Gateway (for monitoring and control of maximum flow temperature). It works well, except when the demand gets very low,...
View ArticleTest2
Can raise a new post but when I tried to reply to the first Test raised by Bruce, that failed
View Article